Product Search
Solution Search
Searchable by product name, product model or standard.
*To search by solution, switch to “solution search.”
i.e., Load Cells, ZTA-50N, 7864 (for ISO 7864)
Searchable by you force type, industry, standard or product sample.
*To search by product, switch to “product search.”
i.e., Compression, 7864 (for ISO 7864)
SEARCH
Cantilever Bending Test Jig
It is for simple cantilever bending test up to 200N.
The distances from the fulcrum to load applying point, from the load applying point to sample end point can be easily adjusted according to the scale.
It is easy to set samples under the same conditions by the adjustment plate, which increases work efficiency.
inquiry number
1C2009A
Present the “inquiry number” below when you contact us, for prompt assistance.
Digital Force Gauge
DST-200N
1
Motorized Test Stand
MX-500N
1
Option Attachment
CBJ-200N
1
For accurate measurement, please make sure the sample bending angle is 45 degrees or less in the test.
Samples exceeding 50 mm in width or 25 mm in thickness are not suitable.
Refer to specifications of each product for details.
Product configuration varies depending on the shape and characteristic of the sample, and measurement conditions.
The recommended capacity of measurement instruments varies depending on the expected force to be loaded.
It is for functional and versatile cantilever bending test up to 200N.
The supplied software draws force-displacement curves.
The distances from the fulcrum to load applying point, from the load applying point to sample end point can be easily adjusted according to the scale.
It is easy to set samples under the same conditions by the adjustment plate, which increases work efficiency.
inquiry number
1C2009B
Present the “inquiry number” below when you contact us, for prompt assistance.
Force Displacement Analysis Unit
FSA-0.5KE-200N
1
Option Attachment
CBJ-200N
1
Safety Shield
ST-SS
1
For accurate measurement, please make sure the sample bending angle is 45 degrees or less in the test.
Samples exceeding 50 mm in width or 25 mm in thickness are not suitable.
Refer to specifications of each product for details.
Product configuration varies depending on the shape and characteristic of the sample, and measurement conditions.
The recommended capacity of measurement instruments varies depending on the expected force to be loaded.
Convenient Unit/Torque/
Tension conversion
6 Significant Digits (*Significant digits are meaningful digits that do not include zeros, which are used to indicate the scale.)
Products