IMADA specializes in
force measurement
Product Search
Solution Search
Searchable by product name, product model or standard.
*To search by solution, switch to “solution search.”
i.e., Load Cells, ZTA-50N, 7864 (for ISO 7864)
Searchable by you force type, industry, standard or product sample.
*To search by product, switch to “product search.”
i.e., Compression, 7864 (for ISO 7864)
SEARCH
Luer fitting adapters
MED-LFA-20N series
- Force Measurement IMADA
- PRODUCTS
- Medical Attachments
- MED-LFA-20N series
Description Add to favorites
MED-LFA-20N-ML
MED-LFA-20N-MS
MED-LFA-20N-FS
For Vial Fixing
Puncture Resistance
Lo-Mid Force
MED-LFA-20N series are adapters which connect sample needles to force gauges without removing their needle hubs so that the test efficiency can be increased.
Feature
- A needle can be installed to the force gauge directly without removing its needle tube from its hub
- Has 3 varieties usable for different luer fittings
- Complies with the corresponding part of ISO
Relevant Industrial Standards
ISO 8871-5 [ 2016 ] [Functional requirements and testing](corresponding part only)
ISO-7864 [ 2016 ] [Sterile hypodermic needles for single use](corresponding part only)
Relevant Information and Materials
Example of Product Configuration
MED-LFA-20N-MS
Features
For penetrability test of elastomeric closures complying with ISO8871-5
The vial holder can hold vials with any standardized sizes.
Enables to measure penetrability of elastomeric closures of vials
Needle can be installed to the force gauge directly without removing its needle tube from its hub.
The clamper and the table of the vial holder are movable to hold sample vials of any standardized sizes tightly.
inquiry number
1L2003A
Present the “inquiry number” below when you contact us, for prompt assistance.
Product used
Digital Force gauge
ZTS-20N
1
Motorized Test Stand
MX2-500N
1
Optional Attachment
MED-LFA-20N-MS
1
Optional Attachment
MED-VH-5N
1
Optional cable
CB-528
1
Optional software
Force Recorder Standard
1
Relevant Industrial Standards
ISO 8871-5 [ 2016 ] [Functional requirements and testing](corresponding part only)
Cautions
The lure fitting adapter in this configuration is MED-LFA-20N-MS, male lure slip type. Refer to the specification sheet for other options of the adapters.
When replacing the sample needles, remove the taper connector of the lure fitting adapter first from the force gauge to protect the sensor of the gauge from overloading.
In the case the sum of the length of the needle and the height of the vial exceeds 185mm, the test stand is required to have long stroke option. Please inquire to us for further details.
Refer to specifications of each product for details.
Product configuration varies depending on the shape and characteristic of the sample, and measurement conditions.
The recommended capacity of measurement instruments varies depending on the expected force to be loaded.
Features
For penetration and drag force test of needles complying with ISO7864
The lure fitting adapters have 3 varieties depending on the form of lure fittings.
Enables to implement penetration and drag force test of a needle by directly connecting a needle hub to the force gauge.
Improves test efficiency since removal of needle tubes from needle hubs is not required.
Please choose the proper adapter according to the type of lure fittings of your samples.
inquiry number
1L2003B
Present the “inquiry number” below when you contact us, for prompt assistance.
Product used
Force-displacement Measurement Unit
FSA-0.5K2-20N
1
Optional Attachment
MED-LFA-20N-MS
1
Optional Attachment
TTB-10
1
Relevant Industrial Standards
ISO-7864 [ 2016 ] [Sterile hypodermic needles for single use](corresponding part only)
Cautions
The lure fitting adapter in this configuration is MED-LFA-20N-MS, male lure slip type. Refer to the specification sheet for other options of the adapters.
When replacing the sample needles, please remove the taper connector of the lure fitting adapter first from the force gauge to protect the sensor of the gauge from overloading.
Refer to specifications of each product for details.
Product configuration varies depending on the shape and characteristic of the sample, and measurement conditions.
The recommended capacity of measurement instruments varies depending on the expected force to be loaded.
Relevant Products
.webp)
.webp)
UnitConverter
Unit ConverterConvenient Unit/Torque/
Tension conversion
6 Significant Digits (*Significant digits are meaningful digits that do not include zeros, which are used to indicate the scale.)
Products
HERE!
Attachments, Grips & Fixtures
Custom Made
Measurements in Special Environment
Temperature and Angle Adjustable Peel Tester
Spot Welding Pressure Gauge
Attachment to Bend Sample 90 Degrees
Horizontal Test Stand with Fine Adjustment Knob
Tester With Thermostatic Chamber
Tester With Far-infrared Heater
Table for Compression Load Cell
Test Stand for Testing at the Desired Position
Particular Samples Measurements
Peel Test Fixture for Crimped Postcard
Attachment for Fixing Wide and Thin Materials
Attachment for Wine Cork Extraction Test
Attachments for 90 degree score bend test
Attachments to measure forces to open flat pack carton
Attachments for break strength testing of lipsticks or lip balms
High capacity dual-column motorized test machine for compression test
Film Grip with Openable Gripping Part
Pantograph Grip with Pressurization Mechanism
Motorcycle Accelerator Torque Test Fixture
Peel Test Fixture for Solar Cell Ribbon
Test Stand With Large Table
Compression Test Attachment for LCD Panel
L-shaped Sample Fixture
Attachment for Opening/Closing Force Test of Takeout Container Lid
Attachment for Squeezing Force Test of Eye Drop Bottles
Compression Test Attachment for Squeeze Tube
Attachment for Welded Nut Tension Test
Attachment for Tube Tension Strength Test
Attachment for Hard-to-Grip Samples
Attachment for Compression Test of Nasal Spray
Individually Adjustable Torque Chuck Attachment
Resistance Force Measurement jig for Hair Combing Test
Attachment for Lateral Compression Test of Cup Containers
Biaxial Tension Tester
Resize & Modification
Press Test Fixture (Wide Size)
Remote Control Switch for Motorized Test Stand
Semi-Customized Compression Attachments
Large Size of Compression Tester
Large Size of 90 Degree Peel Tester
Force Control Cable with Signal Output Box
Manual Test Stand with Displacement Output Option
Cutting Base Plate with groove and knife edge probe
Upper attachment for 4-point bending test
Main shaft stopper with a butterfly screw for MTS series
Wide Rubber Roller for Peel Test
Motorized Rubber Roller for Peel Test
Peel Fixture for Packaged Cooked Rice Lid
Cam grip with spring
Wedge Grip Without Adaptor
Customized Peeling Tester
Test Stand with 3-stage Force/Displacement setting/holding function
Standards-Compliant Measurement
ISO 14704: 2000 Fine Ceramics 4-Point Bend Tester
Ampoule 3-Point Bend Tester
ISO/IEC 10373-1: 2006 Peel Tester of Identification Card
ISO 17480: 2015 Peel Tester for Gable-Top Package
ASTM D1894: 2014 Coefficient of Friction (COF) Tester
Attachments for score bend test
ISO 17480: 2015 45 Degree Complete Peel Test Fixture for Container Lid
IEC 61010-1 (2010) Spherical Jig for Compression Testing
