IMADA specializes in
force measurement
Product Search
Solution Search
Searchable by product name, product model or standard.
*To search by solution, switch to “solution search.”
i.e., Load Cells, ZTA-50N, 7864 (for ISO 7864)
Searchable by you force type, industry, standard or product sample.
*To search by product, switch to “product search.”
i.e., Compression, 7864 (for ISO 7864)
SEARCH
Cable Crimp Terminals Tension Strength Test (Complies with the corresponding part of IEC 60512-16-4: 2008 and JIS C2805: 2010)
- Force Measurement IMADA
- SOLUTIONS
- Industry Machinery / Parts
- Cable Crimp Terminals Tension Strength Test (Complies with the corresponding part of IEC 60512-16-4: 2008 and JIS C2805: 2010)
Description FAVORITES
.webp)
Joint Strength
IEC
JIS
There are 2 ways to measure the tension strength of crimped terminals, durability test and break test. The break test complying with the corresponding part of IEC 60512-16-4: 2008 requires you to determine the maximum force value when the terminal is pulled off. On the other hand, the durability test complying with the corresponding part of JIS C2805: 2010 requires you to pull the crimped terminal continuously at a certain force for 10 seconds, and check the connector part situation after the test. They are used for R&D and quality control.
inquiry number
1P2002B
Present the “inquiry number” below when you contact us, for prompt assistance.
Relevant Industrial Standards
IEC 60512-16-4 [ 2008 ] [Connectors for electronic equipment-Tests and measurement-Part 16-4: Mechanical tests on contacts and terminations-Test 16d: Tensile strength (crimped connections)] (corresponding part only)
JIS C2805 [ 2010 ] [Crimp-type terminal lugs for copper conductors] (corresponding part only)
Related sample
- Crimp terminal
- Cable
- Power connector
Measurement Example Videos
Cautions
Hook a round terminal to the pin as a perpetration for the test.
This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
The products used in this video may differ from the example of product configuration.
Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
Relevant Videos
 (Complies with the corresponding part of IEC 60512-16-4 2008).webp)
Tensile Strength Test of Crimped Wire Terminals (Break Test) (Complies with the corresponding part of IEC 60512-16-4: 2008)
 (Complies with the corresponding part of JIS C2805 2010).webp)
Tensile Strength Test of Crimped Wire Terminals (Durability Test) (Complies with the corresponding part of JIS C2805: 2010)
.webp)
High-Voltage Wire Harness Crimp Terminal Tension Strength Test (Complies with the corresponding part of JIS C2805:2010)
Wire crimped terminal test
Tensile Strength Test of Ferrule Terminals
UnitConverter
Unit ConverterConvenient Unit/Torque/
Tension conversion
6 Significant Digits (*Significant digits are meaningful digits that do not include zeros, which are used to indicate the scale.)
Products
HERE!
Attachments, Grips & Fixtures
Custom Made
Measurements in Special Environment
Temperature and Angle Adjustable Peel Tester
Spot Welding Pressure Gauge
Attachment to Bend Sample 90 Degrees
Horizontal Test Stand with Fine Adjustment Knob
Tester With Thermostatic Chamber
Tester With Far-infrared Heater
Table for Compression Load Cell
Test Stand for Testing at the Desired Position
Particular Samples Measurements
Peel Test Fixture for Crimped Postcard
Attachment for Fixing Wide and Thin Materials
Attachment for Wine Cork Extraction Test
Attachments for 90 degree score bend test
Attachments to measure forces to open flat pack carton
Attachments for break strength testing of lipsticks or lip balms
High capacity dual-column motorized test machine for compression test
Film Grip with Openable Gripping Part
Pantograph Grip with Pressurization Mechanism
Motorcycle Accelerator Torque Test Fixture
Peel Test Fixture for Solar Cell Ribbon
Test Stand With Large Table
Compression Test Attachment for LCD Panel
L-shaped Sample Fixture
Attachment for Opening/Closing Force Test of Takeout Container Lid
Attachment for Squeezing Force Test of Eye Drop Bottles
Compression Test Attachment for Squeeze Tube
Attachment for Welded Nut Tension Test
Attachment for Tube Tension Strength Test
Attachment for Hard-to-Grip Samples
Attachment for Compression Test of Nasal Spray
Individually Adjustable Torque Chuck Attachment
Resistance Force Measurement jig for Hair Combing Test
Attachment for Lateral Compression Test of Cup Containers
Biaxial Tension Tester
Resize & Modification
Press Test Fixture (Wide Size)
Remote Control Switch for Motorized Test Stand
Semi-Customized Compression Attachments
Large Size of Compression Tester
Large Size of 90 Degree Peel Tester
Force Control Cable with Signal Output Box
Manual Test Stand with Displacement Output Option
Cutting Base Plate with groove and knife edge probe
Upper attachment for 4-point bending test
Main shaft stopper with a butterfly screw for MTS series
Wide Rubber Roller for Peel Test
Motorized Rubber Roller for Peel Test
Peel Fixture for Packaged Cooked Rice Lid
Cam grip with spring
Wedge Grip Without Adaptor
Customized Peeling Tester
Test Stand with 3-stage Force/Displacement setting/holding function
Standards-Compliant Measurement
ISO 14704: 2000 Fine Ceramics 4-Point Bend Tester
Ampoule 3-Point Bend Tester
ISO/IEC 10373-1: 2006 Peel Tester of Identification Card
ISO 17480: 2015 Peel Tester for Gable-Top Package
ASTM D1894: 2014 Coefficient of Friction (COF) Tester
Attachments for score bend test
ISO 17480: 2015 45 Degree Complete Peel Test Fixture for Container Lid
IEC 61010-1 (2010) Spherical Jig for Compression Testing
