IMADA specializes in
force measurement
Product Search
Solution Search
Searchable by product name, product model or standard.
*To search by solution, switch to “solution search.”
i.e., Load Cells, ZTA-50N, 7864 (for ISO 7864)
Searchable by you force type, industry, standard or product sample.
*To search by product, switch to “product search.”
i.e., Compression, 7864 (for ISO 7864)
SEARCH
Pull-off Test of Coating (Complies with the corresponding part of ISO 4624: 2002)
- Force Measurement IMADA
- SOLUTIONS
- Industry Machinery / Parts
- Pull-off Test of Coating (Complies with the corresponding part of ISO 4624: 2002)
Description FAVORITES
Other Peel
ISO
JIS
Graph
This is pull-off test for adhesion of coating.This video introduces testing complying with ISO 4624: 2002 Paint and varnished - Pull-off test for adhesion. As per a requirement of the standard, tensile force is applied perpendicularly to the coated surface to be pulled off within 90 seconds at the speed of which does not exceed 1MPa/s. The force value required to pull off the coating is recorded as the test result. Pull the adhered dolly until the sample breaks and obtain the maximum force value. This maximum value is converted to MPa to calculate the breaking strength. IMADA graphing software graphs the relationship between force and time during the test to confirm whether the requirements are met. It also visualizes the load transition for fracture. In addition, with high-speed sampling of 2000 data per second, IMADA force gauge used in this test captures accurate maximum force value. Test 6 or more samples and show the average, maximum and minimum fracture strengths calculated as a result. Watch the video for test details. The tests in this standard ISO 4624: 2002 are used in R&D and quality control.
inquiry number
1T2005A
Present the “inquiry number” below when you contact us, for prompt assistance.
Relevant Industrial Standards
ISO 4624 [ 2002 ] Paint and varnished - Pull-off test for adhesion (corresponding part only)
JIS K5600-5-7 [ 2014 ] [Testing methods for paints-Part 5: Mechanical property of film- Section 7: Adhesion test (Pull-off method)] (corresponding part only)
Related sample
- Paint
- Glue
- Coating
- Varnish
Measurement Example Videos
Cautions
Adhesive is not included.
Sample size is smaller than 50 x 100 ㎜.
This video shows the testing image of objective sample. Some samples may not be suitable to measure with this configuration depending on their materials or shapes.
The example of product configuration is for your reference only. It varies depending on sample, measurement method and testing capacity.
The products used in this video may differ from the example of product configuration.
Please select the right product model for the product configuration. Refer to the specification of each product for the compatibility.
UnitConverter
Unit ConverterConvenient Unit/Torque/
Tension conversion
6 Significant Digits (*Significant digits are meaningful digits that do not include zeros, which are used to indicate the scale.)
Products
HERE!
Attachments, Grips & Fixtures
Custom Made
Measurements in Special Environment
Temperature and Angle Adjustable Peel Tester
Spot Welding Pressure Gauge
Attachment to Bend Sample 90 Degrees
Horizontal Test Stand with Fine Adjustment Knob
Tester With Thermostatic Chamber
Tester With Far-infrared Heater
Table for Compression Load Cell
Test Stand for Testing at the Desired Position
Particular Samples Measurements
Peel Test Fixture for Crimped Postcard
Attachment for Fixing Wide and Thin Materials
Attachment for Wine Cork Extraction Test
Attachments for 90 degree score bend test
Attachments to measure forces to open flat pack carton
Attachments for break strength testing of lipsticks or lip balms
High capacity dual-column motorized test machine for compression test
Film Grip with Openable Gripping Part
Pantograph Grip with Pressurization Mechanism
Motorcycle Accelerator Torque Test Fixture
Peel Test Fixture for Solar Cell Ribbon
Test Stand With Large Table
Compression Test Attachment for LCD Panel
L-shaped Sample Fixture
Attachment for Opening/Closing Force Test of Takeout Container Lid
Attachment for Squeezing Force Test of Eye Drop Bottles
Compression Test Attachment for Squeeze Tube
Attachment for Welded Nut Tension Test
Attachment for Tube Tension Strength Test
Attachment for Hard-to-Grip Samples
Attachment for Compression Test of Nasal Spray
Individually Adjustable Torque Chuck Attachment
Resistance Force Measurement jig for Hair Combing Test
Attachment for Lateral Compression Test of Cup Containers
Biaxial Tension Tester
Resize & Modification
Press Test Fixture (Wide Size)
Remote Control Switch for Motorized Test Stand
Semi-Customized Compression Attachments
Large Size of Compression Tester
Large Size of 90 Degree Peel Tester
Force Control Cable with Signal Output Box
Manual Test Stand with Displacement Output Option
Cutting Base Plate with groove and knife edge probe
Upper attachment for 4-point bending test
Main shaft stopper with a butterfly screw for MTS series
Wide Rubber Roller for Peel Test
Motorized Rubber Roller for Peel Test
Peel Fixture for Packaged Cooked Rice Lid
Cam grip with spring
Wedge Grip Without Adaptor
Customized Peeling Tester
Test Stand with 3-stage Force/Displacement setting/holding function
Standards-Compliant Measurement
ISO 14704: 2000 Fine Ceramics 4-Point Bend Tester
Ampoule 3-Point Bend Tester
ISO/IEC 10373-1: 2006 Peel Tester of Identification Card
ISO 17480: 2015 Peel Tester for Gable-Top Package
ASTM D1894: 2014 Coefficient of Friction (COF) Tester
Attachments for score bend test
ISO 17480: 2015 45 Degree Complete Peel Test Fixture for Container Lid
IEC 61010-1 (2010) Spherical Jig for Compression Testing
